PerPhaseSchedstat

Struct PerPhaseSchedstat 

Source
pub struct PerPhaseSchedstat {
    pub phases: [HostVcpuSchedstat; 5],
}
Expand description

Per-lifecycle-phase host-dilation witness: normally one HostVcpuSchedstat DELTA per stage, covering the schedstat accrued between lifecycle-event boundary snapshots. If the guest-reported scenario duration proves queued lifecycle frames did not bracket Body, Body instead carries the complete enclosing vCPU-thread lifetime. That conservative fallback can overstate Body contention but cannot hide it. Indexed by LifecycleStage as usize.

Distinct from the whole-run VmResult::host_vcpu_schedstat (which is the verdict-line D over the entire run): normally each phase gets its OWN D over its OWN span, so the Body phase’s dilation — the only phase whose contention actually contaminates the workload measurement — is isolated from the Boot / Attach / Teardown INFRA phases. The batched-delivery fallback deliberately gives up that localization. Boot/Attach D is diagnostic; Body is the one the latency verdict consumes.

The dispatch path takes each boundary snapshot immediately after accepting the CRC-valid lifecycle frame. ScenarioEnd’s guest duration detects start/end frames accepted together after a starved dispatch loop. A wide-VM snapshot is a sequential sweep of the vCPU TIDs rather than an atomic kernel operation, so its uncertainty is the duration of that rare sweep, not the monitor’s sampling period.

Fields§

§phases: [HostVcpuSchedstat; 5]

Per-stage schedstat delta, indexed by LifecycleStage as usize (Boot=0 .. Teardown=4). A stage never entered stays at the Default all-zero value (dilation() == None).

Implementations§

Source§

impl PerPhaseSchedstat

Source

pub fn body(&self) -> &HostVcpuSchedstat

The Body (measurement) phase’s schedstat delta — the phase whose dilation the latency verdict consumes.

Source

pub fn body_dilation(&self) -> Option<f64>

The Body phase’s host dilation D, or None when no on-CPU time was sampled in the Body span (schedstats off, or the phase never ran).

Trait Implementations§

Source§

impl Clone for PerPhaseSchedstat

Source§

fn clone(&self) -> PerPhaseSchedstat

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for PerPhaseSchedstat

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for PerPhaseSchedstat

Source§

fn default() -> PerPhaseSchedstat

Returns the “default value” for a type. Read more
Source§

impl<'de> Deserialize<'de> for PerPhaseSchedstat

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl PartialEq for PerPhaseSchedstat

Source§

fn eq(&self, other: &PerPhaseSchedstat) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl Serialize for PerPhaseSchedstat

Source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
Source§

impl Copy for PerPhaseSchedstat

Source§

impl Eq for PerPhaseSchedstat

Source§

impl StructuralPartialEq for PerPhaseSchedstat

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pointable for T

§

const ALIGN: usize

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

§

impl<T> MaybeSend for T
where T: Send,

§

impl<T> MaybeSend for T
where T: Send,