HostVcpuSchedstat

Struct HostVcpuSchedstat 

Source
pub struct HostVcpuSchedstat {
    pub total_on_cpu_ns: u64,
    pub total_run_delay_ns: u64,
    pub sampled_vcpus: u32,
}
Expand description

Host-side vCPU scheduling-dilation sample, summed over the run’s vCPU host threads.

Dilation D = 1 + Σrun_delay / Σon_cpu, where the two sums are taken over each vCPU host thread’s /proc/self/task/<tid>/schedstat (field 1 = time on-CPU ns, field 2 = time runnable-but-not-running ns). D == 1.0 means the vCPU threads always got the CPU the instant they were runnable; D > 1.0 quantifies host-side scheduling delay (e.g. 1.03x = threads waited 3% on top of their run time).

Idle-immune: a halted vCPU is blocked (not runnable), so it accrues no run_delay — halt time never inflates D. Measured HOST-side deliberately: the guest run-queue’s own run_delay would measure the scheduler under test, which is the thing being evaluated; the host thread’s schedstat measures the CPU the vCPU thread was starved of by the HOST, orthogonal to the guest scheduler.

RAW totals are stored (not the ratio) so future consumers can recompute or re-aggregate; Self::dilation derives the ratio.

total_on_cpu_ns == 0 yields dilation() == None — this happens BOTH when no vCPU thread ran at all AND on a host built without CONFIG_SCHEDSTATS (every schedstat line reads "0 0 0"). None is thus graceful and distinguishable from a genuine D == 1.0.

Fields§

§total_on_cpu_ns: u64

Σ schedstat field 1 (time the vCPU threads spent ON-CPU), ns.

§total_run_delay_ns: u64

Σ schedstat field 2 (time the vCPU threads spent runnable but not running — host-side scheduling delay), ns.

§sampled_vcpus: u32

Number of vCPU host threads that contributed to the sums (a TID still 0 — an AP that never stamped its TID — and an unreadable schedstat are both skipped).

Implementations§

Source§

impl HostVcpuSchedstat

Source

pub fn dilation(&self) -> Option<f64>

Host dilation D = 1 + Σrun_delay / Σon_cpu, or None when no on-CPU time was sampled (no vCPU ran, or the host lacks CONFIG_SCHEDSTATS and every line read "0 0 0"). None is deliberately distinguishable from a true D == 1.0 (which needs nonzero on-CPU time with zero run-delay).

Source

pub fn delta_from(&self, anchor: &HostVcpuSchedstat) -> HostVcpuSchedstat

Field-wise saturating delta self - anchor over the two schedstat sums — the on-CPU / run-delay accrued BETWEEN two cumulative snapshots of the same vCPU threads. sampled_vcpus carries self’s count (the reading the delta closes at). Saturating so a schedstat that momentarily regressed (a TID that vanished then reappeared, a torn read) contributes 0 rather than wrapping — conservative: a per-phase D can only be UNDER-stated by such a clamp, never fabricated. The result’s Self::dilation is the phase-local D.

Trait Implementations§

Source§

impl Clone for HostVcpuSchedstat

Source§

fn clone(&self) -> HostVcpuSchedstat

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for HostVcpuSchedstat

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for HostVcpuSchedstat

Source§

fn default() -> HostVcpuSchedstat

Returns the “default value” for a type. Read more
Source§

impl<'de> Deserialize<'de> for HostVcpuSchedstat

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl PartialEq for HostVcpuSchedstat

Source§

fn eq(&self, other: &HostVcpuSchedstat) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl Serialize for HostVcpuSchedstat

Source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
Source§

impl Copy for HostVcpuSchedstat

Source§

impl Eq for HostVcpuSchedstat

Source§

impl StructuralPartialEq for HostVcpuSchedstat

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pointable for T

§

const ALIGN: usize

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

§

impl<T> MaybeSend for T
where T: Send,

§

impl<T> MaybeSend for T
where T: Send,